With wide temperature and humidity control range, the TH-ME-100 Tabletop Temperature & Humidity Chamber delivers excellent environmental test results.

Performance:

• Microprocessor PID control/temperature calibration/automatic tuning.
• Uniform temperature and humidity control guarantees reliable test results.
• Air-tight door closure with perfect sealed packing. Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
• Maintenance of water supply is easily performed. Water level condition is easy to check by the water level indicator on the front control panel.
• Water supply during operation is also available for long term test purposes.
• Direct water system provides user great convenience when performing long-term tests (optional). 

​

Convenience:

• Compact design and quiet operation.
• Corrosion resistance stainless steel chamber.
• Operating condition is clearly noticed by front LED indicator. Three different coloured lights show each status of running, stop, and power off condition.
• Clear observation of samples. Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
• Cable port for introduction of external probes or wires. 50mm diameter cable port comes standard on the left side of the unit. Additional 50mm or 80mm diameter cable ports, custom ordered (optional).
• Two types of stands for space-saving (optional). Single stand with a drawer provides enough storage space. Two step stand accepts loading two units to save limited space.
• User friendly LCD controller. Colourful interactive touch type LCD controller. Set point temperature and present temperature are clearly shown together on display. Sufficient programmable control support. Operating progress can be shown in graph mode for better data understanding. Automatic start/stop can be programmed for unattended operations. Display indicates abnormal temperature changes or power failures. Selective bilingual language support (Korean/English or English/Chinese, selective only when placing an order). Temperature and other operating parameters can be recorded using a six channel digital recorder (optional).
• Computer interface. RS-485 communication port (optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature. Programme patterns are simple to set with the use of our software. Easy to check status of real-time operations. Storage and documentation of programmes. Data with saving capabilities in Excel and text format. Storage of programme information, back-up of value settings, recovery, and temperature values. RS-232 communication port as standard offer. 

Safety:

• Built-in door lock with a key.
• Automatic shut off after overheat alarm.
• Low and empty water level alarm.
• Power supply leakage breaker.
• Over current protection.
• Open door alarm. ​

Specifications

Temperature Range(s): -20 to 150 (without humidity) and 15 to 90 (with humidity)

Temperature Fluctuation at 25°C/60% RH: ± 0.2

Temperature Variation at 25°C/60% RH: ± 0.2

Heating Time Without Humidity (min.): 73 at -20°C - 120°C

Cooling Time Without Humidity (min.): 153 at 120°C - -20°C

Humidity Range (% RH): 20 to 95

Humidity Fluctuation at 60% RH/55°C: ± 2.7

Humidity Variation at 60% RH/55°C: ± 1.2

Water Tank Capacity (litres): 14.5

Water Tank Quality: pH 6.2 to 7.2/Electrical conductivity 20°C/cm to below

No. of Wire Shelves (standard/max.): 2/10

Distance of Between Shelves (mm): 20

Max. Load Per Shelf (kg): 25

Permitted Total Load (kg): 65

Internal Dimensions (w x d x h): 498 x 390 x 538mm

External Dimnesions (w x d x h): 760 x 1108 x 1096mm

Viewing Window Dimensions: 220 x 300mm

Weight (kg): 135

Cable Port (standard/max.): Basically one hole provided/Ø 50mm). Optionally max. two holes available/Ø 50mm or Ø 80mm.

Interface Port: Basically RS-232C (RS-485 optional)

Electrical Requirements (230V, 1ph, 50Hz): 15.5A​