NT-1155 > 중고계측기

Specifications : JDSU NT1155 ValidatorPRO-NT Ethernet Cable Tester Ethernet Speed Certifier
Display : Color back-lit FSTN liquid crystal display (LCD)
Operating System : Linux
Keypad : Full navigations set with alphanumeric data entry and soft-key functions
Memory : Non-volatile memory: internal NAND flash memory Volatile memory: 128 MByte DDR2 SDRAM memory
Interfaces : USB 2.0 host port (for external memory sticks) Optical Power meter for 50/1300/1310/1490/1550 nm wavelengths. -45 to +10dBm dynamic range for 850nm and -50 to +10dBm for all other frequencies. ±0.20dB accuracy. ±0.06dB linearity. Measured in dB or dBm. Auto wavelength selection with 270, 330, 1k, 2kHz modulation Wi-Fi 2.4 GHz 802.11 b/g/n standards with MIMO technology. Support 64/128-bit WEP encryption, WPA, WPA2, and CISCO CCX security
Test Connectors : 8-position shielded modular jack (data); 6-position modular jack (telephone); F-coax (video) Male connector w/sacrificial adapter; 2.5 mm universal push pull (UPP) (Fiber)
Cable Types : Shielded or unshielded twisted pair network cable; Telephone; Coax; Single mode and multi mode fiber cable
Maximum cable length : 100 meters (1,500 ft)
Maximum cable length for testing of split pairs : Up to 100 m (327 ft),depending upon cable type
Cable length accuracy : ±5% (after performing both unit and cable calibration)
Power sources : AC adapter; auto cigarette lighter power adapter; lithium-ion rechargeable, removable batteries
Operating temperature : 0 to 50°C (32 to 122°F) (normal operation, not charging battery) 0 to 45°C (32 to 113°F) (charging battery)
Storage temperature : - 20 to 60°C (-4 to 140°F)
Operating humidity : 10 to 85% RH, non-condensing
Shock and Vibration minimum : 2 ft drop (free fall from stationary) on concrete
Safety : EN 61010-1
EMI/EMC : EN 61326-1:2006
Altitude : 4000 m
Agency Certifications and Compliance : Main and Remote units: CE Battery: CE AC wall adapter: CE, PSE, UL Auto cigarette lighter power: CE
Calibration : Traceable Calibration Period: 2 Years Self-Calibration Period: 30 days for unit calibration Perform cable calibration whenever changing cable type being measured.
Main Unit Dimensions : 22.9 x 11.4 x 5.3 cm (9 x 4.5 x 1.8 in)
Main Unit Weight : 710 gm (1 lb 9 oz) with battery
Remote Dimensions : 14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 in)
Remote Weight : 341 gm (12 oz) with battery